Ubuntu on HPE ProLiant DL120 Gen9
Feedback
If there is an issue with the information for this system, please let us know.
The HPE ProLiant DL120 Gen9 server with the components described below has been awarded the status of certified for Ubuntu.
Ubuntu 16.04 LTS 64-bit
Available from ubuntu.com
Testing details
This system was tested with 16.04 LTS, running the 4.4.0-21-generic kernel.
Certification notes
- HP Dynamic Smart Array
System is certified with Dynamic Smart Array disabled.
To disable Dynamic Smart Array:
* Press F9 to boot into RBSU
* Navigate to System Options -> HP Dynamic Smart Array B320i and select disable
* Go to System options -> SATA Controller options and select Legacy SATA or AHCI
* Reboot the machine and now you will be able to install the OS.
- BIOS
- HP: P86 (UEFI)
Ubuntu 14.04.1 LTS 64-bit
Available from ubuntu.com
Testing details
This system was tested with 14.04 LTS, running the 3.13.0-35-generic kernel.
Certification notes
- HPDSA Driver Installation (MAAS)
This system requires the HPDSA driver for "smart array mode". In order to use systems with Smart Array controllers in "smart array mode" with MAAS, you will need to modify drivers.yaml to include the hpdsa driver. Instructions for this can be found here: https://downloads.linux.hpe.com/SDR/project/ubuntu-hpdsa/
- HP ILO and MAAS
ILO firmware version 2.30 will not work with MAAS. To use this system in a MAAS environment you will need to update to the latest ILO firmware (greater than version 2.30).
If you are using ILO 2.20 or older, you are not affected by this issue. Please refer to HP for more information on updating ILO firmware.
- BIOS
- HP: P86 (UEFI)
Hardware summary
This system was tested with these key components:
| Processor | |
| Video | |
| Ethernet |
Intel I350 Gigabit Network Connection Ethernet 1Gb 2-port 361i Adapter |